CNC-machined M5 adjustable turnbuckles, 91mm length, made from tough HUDY Spring Steel™. Set of 2. 

Molded composite rear brace holder, can be mounted either on left or right side. 

Inner ball joint for rear upper camber link. Set of 2. 

Molded composite rear upper camber link ball joints fit on the outside end of the camber link turnbuckle of the XT8. Set of 2. 

Mounting pivot ball with shoulder 6.8mm dia. Set of 4. 

Pivot ball 6.8mm diameter. Set of 4. 

The rear uprights were redesigned and feature larger outside 8x16x5mm ball-bearings for increased reliability and life-span.  

Set of molded composite shims for rear hub carrier adjustment. Set includes: 3.2x9x1mm shims (2x) and 3.2x9x2mm shims (2x). 

Fully redesigned rear wing holder increases stability on high-speed tracks and has a super-slim, 1-piece design for reduced weight and increased strength.  

CVD drive axle made from world-renown HUDY Spring Steel. Strategically machined for toughness and light weight without compromising strength. 

CVD drive shaft coupling for CVD drive shafts made from world-renown Hudy Spring Steel. Specially hand-ground for maximum precision. 

Hardcoated lightweight aluminum wheel axles with +5mm offset. May be used at either front and rear. Set of 2. 

Super-tiny, lightweight CVD universal drive shaft (138mm) for XT8 made from world-renown HUDY Spring Steel™ has been strategically machined for toughness and light weight without compromising strength.  

Polished chrome pin with flat spot, 3.0 x 16.8mm. Specially hand-ground for maximum precision. Set of 2. 

Rear lower outer pivot pins. Hardened steel, 3mm thick. Set of 2. 

M5x4 setscrew, hex drive. Set of 10 pieces. 

M3x14 button-head machine screw, hex drive. Set of 10 pieces. 

M3x18 button-head machine screw, hex drive. Set of 10 pieces. 

M3x30 button-head machine screw, hex drive. Set of 10 pieces. 

M3x12 flat-head machine screw, hex drive. Set of 10 pieces.

 

M3x18 socket-head cap screw, hex drive. Set of 10. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 8x16x5. Set of 2 pieces. 

High-speed ball-bearings for XB8’18 and XB8E’18 manufactured specially for XRAY. ID x OD x thickness (mm) = 13x19x4. Set of 2. 

M3 nylock nut. Set of 10 pieces. 

Polished chrome pin. Dia. x length = 2.5mm x 13mm. Set of 10 pieces.